Invacare® Comet Series
CE marking of the mobility device
–
The conformity assessment/CE marking was carried
out in accordance with Directive 93/42 EEC and only
applies to the complete product.
–
The CE marking is invalidated if components or
accessories are replaced or added that have not been
approved for this product by Invacare.
–
In this case, the company that adds or replaces the
components or accessories is responsible for the
conformity assessment/CE marking or for registering
the mobility device as a special design and for the
relevant documentation.
Important information about maintenance work
tools
–
Some maintenance work which is described in this
manual and can be carried out by the user without
problems require the correct tools for proper work.
If you do not have the correct tool available we do
not recommend that you try to carry out the relevant
work. In this case, we urgently recommend that you
contact an authorized specialist workshop.
2.7
Labels on the product
A
Identification of charger
socket (left-hand side of
steering column, not visible in
picture).
B
Identification of transport
fixation hooks.
C
Identification label sticker on
the chassis at the rear.
For details see below.
D
European representative label
on the chassis at the rear.
14
1603455-A
Summary of Contents for Comet Series ALPINE Plus
Page 31: ...Accessories Change the front side shroud Change the rear side shroud 1603455 A 31...
Page 61: ...Notes...
Page 62: ...Notes...
Page 63: ...Notes...
