1.
Push release lever inward or outward.
2.
Adjust component to desired position.
3.
Pull upward to remove component .
5.19.2 Adjusting Length (Standard 80° Legrest)
•
5 mm Allen key
Fig. 5-58
1.
Loosen screw (1).
Do not remove screw (1).
2.
Adjust component to desired position.
3.
Tighten screw.
5.20 Manually Height-Adjustable Legrest
5.20.1 Swivelling and/or Removing Legrests (Manually
Height Adjustable)
The unlocking knob is located on the top section of the
legrests. When the legrest is unlocked, it can be swivelled
to the inside or outside to facilitate getting in, or can be
completely removed.
Fig. 5-59
1.
Press unlocking knob (1) and remove legrests upwards.
5.20.2 Adjusting Legrest Angle (Manually Height
Adjustable)
CAUTION!
Risk of crushing
– Do not reach inside the swivelling range of the
legrest.
1528224-Y
75
Summary of Contents for Bora Series
Page 126: ...Notes...
Page 127: ...Notes...
