Installing Fender
1.
Install parts in reverse order.
2.
Test all functions.
6.7.8 Replacing Front Fender on Double-Sided Fork
CAUTION!
Risk of Crushing to Hands and Feet by Weight of Mobility Device
– Pay attention to hand and feet.
– Use proper lifting techniques.
CAUTION!
Risk of Uncontrolled Movement of Mobility Device
– Turn off power supply (ON/OFF key).
– Engage drive.
– Before raising mobility device, secure wheels by blocking them with wedges.
– Prevent the mobility device tipping by propping it up on a wooden block which is long and wide enough under
the battery case. If the wooden block is too short or too high, the mobility device can still tip.
•
TX40 Torx key
•
Oblong wooden block (at least 14 x 14 x 30 cm)
1.
Place wooden block underneath mobility device and
prop up mobility device.
2.
Remove wheel. See
6.10.7 Replacing Castor Wheel on
3.
Slightly push on fender
B
at point
A
and swivel fender
downwards.
4.
Remove fender
B
backwards out of fork
C
.
Fig. 6-14
5.
Install parts in reverse order.
6.
Test all functions.
6.7.9 Replacing Rim Cap and Insert (Drive Wheel)
•
Flat screwdriver
1654647-B
31