CAUTION!
Risk of injury exists if a mobility device that
is not equipped with leak-proof batteries is
transported in a vehicle.
-Only ever use leak-proof batteries.
CAUTION!
Risk of injury or damage to the mobility device or to
the transporting vehicle, if the legrests are in a
raised position while the mobility device is used as a
vehicle seat.
-Always completely lower height-adjustable legrests,
if equipped.
This mobility device complies with the requirements of ISO
7176-19 and may be used as a vehicle seat in connection with
an anchoring system that has been checked and approved in
accordance with ISO 10542. The transporting vehicle must be
professionally converted to anchor the mobility device. Contact
your vehicle’s manufacturer for more information.
The mobility device has undergone a crash test in which it was
anchored in the transporting vehicle's direction of travel. Other
configurations were not tested. The crash test dummy was
secured using pelvic and upper body safety belts. Both types of
safety belt should be used in order to minimize the risk of
injuries to head or upper body.
It is imperative that the mobility device is inspected by an
Invacare provider before being used again after being involved
in a crash. Alterations to the mobility device anchoring points
may not be carried out without the manufacturer's permission.
8.5.1 How the Mobility Device is Anchored in a Vehicle
The mobility device is equipped with tie-down
points. Snap hooks or belt loops can be used for
fixation. If the wheelchair can be used as a
vehicle seat, these tie-down points are labelled
with the symbol shown on the right.
Fig. 8-1 Base Tie-Down Points—All Wheelchairs
60
60101916-A
Invacare® AVIVA™ FX
Summary of Contents for AVIVA FX
Page 106: ...Notes...
Page 107: ...Notes...
