Invacare Action Vertic, User Manual

Page: 23 / 56

Accessories
1. Shorten or extend the loop D as required.
2. Thread loop D through catch A and plastic buckle E
until the loop is flat.
If this adjustment is not sufficient, it might be required to
re-fit the posture belt at the fixations.
Fitting the posture belt at the fixations
CAUTION!
– Thread the belt loop through both plastic
buckles to avoid the belt from loosening.
– Do the adjustments on both sides equally,
so that the buckle clasp remains in a central
position.
– Make sure that the belts do not get caught in
the spokes of a rear wheel.
1. Thread the loop F through the fixation on the chair G
and then through BOTH plastic buckles H .
4.2 Table tray
WARNING!
Risk of tipping / injury
– Max load on the table: 5 kg
CAUTION!
Risk of discomfort / minor bruises
– Make sure that the elbows of the user
are placed on the table when pushing the
wheelchair. If the elbows protrudes from the
table while pushing the wheelchair, there is a
risk of discomfort or minor bruises.
Table tray installation
Table tray A installation must be carried out by an
authorized dealer.
Depth adjustment
Slide the table tray
A
forwards or backwards to adjust to
the required depth.
1648806-B.00 23