Invacare Action 2NG, User Manual

Page: 28 / 60

Invacare® Action 2 NG
1. Loosen the screw in the stop block B .
2. Loosen the handwheel A .
3. Adjust the headrest to the desired position.
4. Re-tighten the handwheel A down to the top of the
headrest attachment.
5. Slide the stop block B .
6. Re-tighten the screw .
It is now possible to remove the headrest and
reinsert it in the desired position without further
adjustments.
Depth / angle adjustment
1. Loosen the handle
D
.
2. Loosen the screws C .
3. Adjust the depth and angle of the headrest.
4. Re-tighten the handle and the screws.
4.4 Tipper aid
With the tipper aid, an assistant can tip the wheelchair
more easily, in order to navigate steps for example.
WARNING!
Risk of overturning
– Ensure that the tipper aid does not project
beyond the external diameter of the rear
wheel.
1. Hold the wheelchair by the push handles.
2. Press the tipper aid with your foot and hold the
wheelchair in the tipped position until you have
overcome the obstacle.
4.5 Table tray
WARNING!
Risk of tipping / injury
– Max load on the table: 8 kg
28 1608216-C