Invacare® Action 2 NG
Unfolding the backbrace
1.
Fold the backbrace
B
upwards.
2.
Align the backbrace
B
with the push handle and push it
down on the hand screw
A
.
3.
Firmly tighten the hand screw
A
and makes sure that
the TWO hand screws
A
are properly tighten .
It is important to ensure that the backbrace is
correctly fitted and engaged at all times when the
chair is in use. It should not be left hanging loose
(see label
C
on the backbrace).
3.7 Push handles
IMPORTANT!
– Always check the push handles before using
the wheelchair, as to whether the hand grips
are secure, cannot be turned and cannot be
pulled off.
Height adjustable, integrated push handles (optional)
The height adjustable, integrated push handles allow any
assistant to adjust the handles to a comfortable level.
1.
To set the height of the push handles, loosen the knob
A
, push the handle to the desired position and tighten
the knob again.
18
1608216-C
Summary of Contents for Action 2NG
Page 59: ...Notes...
