To install your Raspberry Pi, lay
the assembly on the LEFT side
so that the metal standoffs are
facing upward and the HDD
connections are facing you
Roughly position the RPi as
pictured and prepare to affix
the supplied heat sinks to the
RPi
Affix the heat sinks on the RPi
BEFORE attaching the Fan HAT
(Part 10)
Place the Fan HAT and fan
assembly over the RPi.
Line up the holes with the
standoffs under the RPi and
insert and loosely tighten an
M2.5x16 (Part 11) into one of the
corners
TERRAPI EXTREME DUO
Assembly Instructions Page 9 of 11
© INUX3D 2021
V1.1
