inuvi - Protecting Your Life!
inuvi GPS-306 3G Quick Installation Guide
inuvi GPS-306 3G Tracker Preparation
● Insert a nano-SIM card with chip facing downward (For Hong Kong based users CSL
prepaid card suggested) into the nano-SIM card slot.
● Make sure that the SIM’s PIN code is deactivated. For CSL Hong Kong the PIN code
is deactivated by default.
● Make sure the tracker has a minimum battery charge. Use a micro USB cable to
charge the device for about 20 to 30 minutes. The charging port is next to the
nano-SIM card slot. Use a standard USB phone charger or a computer USB port.
inuvi GPS-306 3G Tracker 4-Step Setup SMS Commands
1.
Step 1:
Set server IP and Port for the inuvi tracking server
SMS Command:
adminip123456 16.163.78.37 40265
Reply from device:
adminip ok
2.
Step 2:
Set phone number for SMS alerts
SMS Command:
admin123456 00000000
(00000000 = phone number)
Reply from device:
admin ok!
3.
Step 3:
Turn tracker’s GPRS on
SMS Command:
gprs123456
Reply from device:
GPRS ok!
4.
Step 4:
Arm the device! If not done, no data will be sent to the server!
SMS Command:
arm123456
Reply from device:
Tracker is activated
Revision: 27072022_CHL_V4
