Snapdragon
Flight
™
Kit (Developer’s Edition)
Quick Start Guide
Your use of this document is subject to and governed by those terms and conditions in the Intrinsyc Purchase and Software License Agreement for the Snapdragon Flight Development Kit based on the Qualcomm Snapdragon 801 processor, which you or the legal entity you represent, as the case
may be, accepted and agreed to when purchasing a Snapdragon Flight Development Kit based on the Qualcomm Snapdragon 801 processor from Intrinsyc Technologies Corporation (“Agreement”). You may use this document, which shall be considered part of the defined term “Documentation”
for purposes of the Agreement, solely in support of your permitted use of the Snapdragon Flight Development Kit based on the Qualcomm Snapdragon 801 processor under the Agreement. Distribution of this document is strictly prohibited without the express written permission of Intrinsyc
Technologies Corporation and its respective licensors, which they can withhold, condition or delay in its sole discretion.
Intrinsyc is a trademark of Intrinsyc Technologies Corporation, registered in Canada and other countries. Qualcomm and Snapdragon are trademarks of Qualcomm Incorporated, registered in the United States and other countries.
1. RAM pop memory on top of Snapdragon 801 processor
2. Serial number
3. Micro USB 3.0 (Type AB) (OTG) port, J2
4.
Remote receiver connector, J15 *
5. eMMC flash
6. Serial board connector, J3
7. IMU connector, J9 *
8. Micro SD card slot
9. GPS antenna connector, J6 *
10. WLAN antenna connectors, J7 & J8*
11. Gimbal connector, J12 *
12. ESC connector, J13 *
13. Power connector, J14
14. 4K camera
15.
Optic flow camera *
* on bottom side
Package Contents
Snapdragon Flight development board with Qualcomm®
Snapdragon™ 801 processor, 2GB LPDDR3 RAM / 32GB
eMMC Flash
Serial debug adaptor board and USB/serial debug cable
5 V DC power supply, power cord and power adaptor cable
13
14
3
6
5
1
2
8
15
9
10
12
11
4
7
