Open-X™ 8M Development Kit based on the NXP i.MX8™ Processor User Guide Version 1.0
31
Copyright Intrinsyc Technologies Corporation
Open-X Display Interfaces
The display output options for the Open-X 8M Development Kit consists of:
•
An HDMI Type-A connector
o
HDMI 2.0a (4K 60Hz)
•
A 100-pin display connector that supports:
o
MIPI DSI (up to 1080 x 1024 at 60Hz)
o
Touch screen capacitive panels via I2C, SPI, and interrupts (up to two
devices)
The Open-X development platform can support the following display combinations:
MIPI DSI
1 x 4lane DSI
Display 1080 x 1024 at 60Hz
HDMI
• HDMI 2.0a supporting one display: resolution up to 4096 x 2160 at 60 Hz
• 20+ Audio interfaces 32-bit @ 384 kHz fs, with Time Division Multiplexing (TDM)
3.8.13.1
HDMI Connector J1000
The on-board HDMI Type-A connector enables the Open-X development platform to connect to
an external HDMI monitor or television via a standard HDMI cable. The Open-X 8M can support
up to 4K UHD (4096 x 2160 at 60 Hz) and HDMI 2.0 a.
Please note that the Open-X 8M Development kit is for evaluation purposes only and may not be
HDMI standard compliant.
Figure 3-21 HDMI connector on Carrier Board J1000
