Open-Q™ 624A Development Kit
Open-Q™ 624A Development Kit User Kit
54
3.9 Accessories
3.9.1 Camera Module Accessory
Two different camera modules are available as optional accessories and are not included in the development
kit. They are available for purchase from the Lantronix online store in the Accessories section:
1. 13MP Camera – based on the Sony IMX214 13MP sensor with a raw RGB MIPI CSI output, it
interfaces to the development kit through the included 21cm JAE interface cable at connector. The
camera can be connected to connectors J4 or J5 on the development kit.
Figure 29 - 13MP Camera Accessory
3.9.2 LCD / Touchscreen Accessory
An optional LCD/touchscreen display is available and can be connected to the Open-Q 624A development kit.
The LCD can be used for the Android UI instead of the HDMI output, but both cannot be used at the same
time. The LCD connects via the display connector J2, on the bottom of the carrier board. Connection is made
with a 51-signal flex cable from JAE (JF08 series), which is included with the LCD accessory.
The compatible display accessory is called Open-Q 2100 LCD and is available for purchase on the Lantronix
Figure 30 LCD / Touchscreen Display Accessory
Resolution: 480x854
