Open-Q™ 624A Development Kit
Open-Q™ 624A Development Kit User Kit
22
Function
Switch
Position
Description
Notes
CBL_PWR_N
1
When switch is ON, platform will automatically
boot when power is applied
Default out of the box configuration is ON
NC
2
No Function
BAT_THERM
3
Turn switch ON to simulate battery thermistor,
either when using a battery pack without
thermistor, or when using onboard DC power
supply instead of battery.
Default out of the box configuration is ON.
See section 3.8.4 above for more details
on switching between battery and onboard
DC Power Supply.
BAT_ID
4
Turn switch ON to simulate battery ID, either
when using a battery pack without a battery ID
pin, or when using onboard DC power supply
instead of battery.
Default out of the box configuration is ON.
See section 3.8.4 above for more details
on switching between battery and onboard
DC Power Supply.
Warning!
Before making any changes to the dip switch, make sure to note down the previous configuration.
3.8.6 Battery Connector J300
Figure 8 J300 Battery Connector
