Open-Q™ 820 (APQ8096) / 820Pro (APQ8096SG) µSOM Development Kit User Guide Version 1.4
13
Copyright Intrinsyc Technologies Corporation
Figure 3 Open-Q 820 / 820Pro µSOM
3.7.1 µSOM Mechanical Properties
Area
12.5 cm
2
(25 mm x 50 mm)
Interface
3 x 100-pins Hirose DF40 connectors (B2B
Connector).
Thermal
A top side heat sink is installed by default.
Shielding
A top side shield can for the GPS front end
is installed by default.
3.7.2 µSOM Block Diagram
The Open-Q 820 / 820Pro µSOM measuring 25mm x 50mm is where all the processing
occurs. It is connected to the carrier via three 100 pin Hirose DF40 connectors. The purpose
of these connectors is to bring out essential signals such that other peripherals can be
connected to the platform.
50 mm
25 mm
