Maintenance and repair
INTORQ | BA 14.0200 | 02/2016
45
7.5
Accessories
Locking element of the manual release
The locking element (35) of the manual release can be procured optionally as retrofit kit.
Fig. 21
Installation of manual release or locking element
1. Pre-assemble the clip (12.11) loosely on the manual release shackle (12.2) with screws (36).
2. Screw the locking bolt (35.2) into the clip (12.11) and secure it by means of the lock nut (22).
3. Setting approx. 1-2 mm above magnet housing.
4. Operate the manual release. Engage the locking bolt (35.2) into the corresponding hole in the magnet
housing. Turn the head of the locking bolt (35.1) to secure it. Tighten the screws (36, M6) using 9 Nm
torque. The rotor must be able to rotate freely. This position is set by correspondingly moving the clip
(12.11).
5. Check the function of the manual release or locking element; if required, repeat the adjustment process.