Mechanical installation
INTORQ | BA 14.0214 | 10/2019
29
5.6
Brake mounting
Notice
Here, the mounting of the brake is shown in the version with the optional flange and toothed
shaft
NOTICE
Only in the case of rotors with mounting paste on their gear teeth:
¾
Remove cover films from both front ends of the rotor.
¾
Protect friction surfaces against contact with mounting paste!
¾
After the mounting, excessive mounting paste must be removed properly!
Fig. 11:
Assembly of the rotor
A
Rotor
B
Hub or shaft with teeth (optional)
C
Flange (optional)
D
End shield
CAUTION
Note the illustration showing the chamfer of the rotor!
1. Push the rotor onto the shaft and check that it can be moved by hand.
