IntGuard™ G6-‐009 GSM Alarm System Quick Start Guide
Thank you for purchasing IntGuard G6 high-‐quality GSM/PSTN Alarm System. The
system has been carefully inspected, programmed and tested in factory and before
we ship to you. Below steps can help you quickly get the system up running. For
any questions please email to
right away. Your questions
will be answered shortly.
1.
Please refer “Terms and Conditions” at the end of this guide for the usage
agreement of this product.
2.
Check the package list
The box contains the following list of items:
a.
Main Panel and its power adapter
b.
Two pre-‐programmed pet-‐friendly motion sensor
c.
Four pre-‐programmed door/window smart sensors
d.
Two remote control fobs
e.
Full Manual
f.
Other small accessories such as PSTN line socket and PSTN phone cable
Note that the panel’s front surface has a thin protective film on it. Leave it on
the panel or till when you finish mounting the panel.
3.
Do not turn the panel power on yet. This system supports both GSM wireless
communication and also old-‐fashioned PSTN phone line. You can use either
way or use both ways for added reliability. You must have good GSM signal
in order to use GSM communication. We will show you how to setup GSM
communication in a separate page.
In this quick start guide, we show you how to get PSTN phone line connected.
To use PSTN phone line, follow below steps:
a.
Plug in phone line socket to the back panel
b.
Plug the included PSTN phone cable into your wall phone socket
c.
Plug the other end of the PSTN phone cable into the phone line
socket of alarm panel
d.
Plug your existing phone cable to the other port of the alarm’s
phone socket so that your existing phone on this line still works