![background image](http://html1.mh-extra.com/html/intex/sf20220r/sf20220r_owners-manual_2081467010.webp)
128
SAVE THESE INSTRUCTIONS
Page 10
(128) MODEL SF20220R SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 09/08/2009
English
S
E
T
U
P
IN
S
T
R
U
C
T
IO
N
S
POOL INLET - NOZZLE & PLUNGER VALVE SETUP
1.
Grasp the strainer and plunger valve
mechanism.
2.
In a counter-clockwise motion unscrew
plunger valve union from the threaded
strainer connector
(25) (see drawing 5).
Be careful not to lose the step rubber
washer
(22)
. Place the plunger valve on the
ground in a safe place.
3.
In a counter-clockwise motion unscrew the
strainer nut
(23)
from the threaded
connector
(25).
Leave the flat washer
(24)
on the connector
(25)
.
4.
Install the nozzle and plunger valve at the
upper position of pool inlet. From the inside
of the pool liner insert the connector
(25)
into one of the pre-cut holes with the
washer remaining on the connector to be
placed against the inside of the liner wall.
5.
Before assembly, lubricate the threads with
a petroleum jelly. With the flat side of the
strainer nut
(23)
facing the outside wall of
the liner in a clockwise motion screw the
strainer nut
(23)
back onto the threaded
connector
(25) (see drawing 6)
.
6.
Finger tighten the adjustable pool inlet
nozzle
(26)
and the strainer nut
(23)
onto
the threaded connector
(25)
.
7.
Grasp the plunger valve assembly. Make
sure the step washer
(22)
is in place.
8.
In a clockwise motion screw the plunger
valve union back onto the threaded
connector
(25) (see drawing 7)
.
9.
Examine the plunger valve to see if the
handle is pushed fully down to the "0/1"
position. If not, then grasp the handle at
the top and push down turning the handle
in a clockwise direction until the plastic
protruding notch anchors in the "0/1"
position. This will prevent water from
flowing out during filling
(see
drawings 8.1 & 8.2)
.
10
. Adjust the direction of nozzle head pointing
away from the pool outlet for a better
circulation result
(see drawing 9)
.
11.
The pool liner is now ready to fill with
water. Consult the above-ground-pool
owner’s manual for filling instructions.
5
7
8.1
8.2
INSIDE
LINER
WALL
POOL
9
2
1
1
2
1
2
6
24
25
26
INSIDE
LINER WALL
23
WATER
FLOW