2016-0685
2017-10-02
•
To avoid injury exercise care when entering or existing the spa or hot tub.
•
Always add chemicals to water, never add water to chemicals. Adding
water to chemicals may cause strong fumes or violent reactions and
hazardous chemical spray.
•
Never jump or dive into a spa or any shallow body of water.
•
Assembly and disassembly by adults only.
•
Always unplug this product from the electrical outlet before removing,
cleaning, servicing or making any adjustment to the product.
•
The plug must be accessible after product is installed.
•
Do not bury the electrical cord. Locate the cord where it will not be
damaged by lawn mowers, hedge trimmers and other equipment.
•
If the supply cord is damaged, it must be replaced by a qualified electrician in
order to avoid a hazard. Use only identical replacement parts when servicing.
•
To reduce the risk of electric shock, do not use extension cords, timers, plug
adaptors or converter plugs to connect unit to electrical supply; provide a
properly located outlet.
•
Do not attempt to plug in or unplug this product while standing in water or when your hands are
wet.
•
Do not leave the spa empty for extended period of time. Do not expose the spa under direct
sunshine.
•
Adequate drainage system must be provided around the spa to deal with overflow water.
•
Do not allow the water in the spa to freeze. Do not turn on the spa when the water is frozen.
•
Do not use the spa if damaged in delivery and/or malfunctioning in any
fashion. Contact the Intex service center for further direction.
•
Never pour water with a temperature higher than 40°C (104°F)into the spa directly.
•
Keep all pets away from spa to avoid any damage.
•
Do not add bath oil or bath salt to the spa water.
•
WARNING
•
This product is provided with a GFCI/RCD located at the end of the power
cord. The GFCI/RCD must be tested before each use. Do not use the spa if the
GFCI/RCD does not function properly. Disconnect the power cord until the
fault has been identified and corrected. Contact a qualified electrician to
correct the fault. Do not bypass the GFCI/RCD. There are no serviceable
parts inside the GFCI/RCD. Opening the GFCI/RCD will void the warranty.
•
Plug the power cord into a grounded electrical socket.
•
Press the
RESET
button on the GFCI/RCD
.
•
Turn on the spa electrical equipment.
•
Press the
TEST
button on the GFCI/RCD
.
The GFCI/RCD indicator should turn off and the
electrical equipment should shut off. If the GFCI/RCD indicator does not turn off, and the
electrical equipment does not shut off, the GFCI/RCD is faulty. Do not use the spa. Contact
a qualified electrician to correct the fault.
Press the
RESET
button on the GFCI/RCD. The indicator on the GFCI/RCD should turn
on. If the GFCI/RCD indicator does not turn on, the GFCI/RCD is faulty. Do not use
the spa. Contact a qualified electrician immediately to correct the fault
When ordering parts, be sure to quote the model number and part numbers.
SPA SUCTION FITTING
Self-contained spa fittings. – For multiple
outlet use only. – Wall mounting only.
Replace suction fittings within 3 installed
years. – Tool required: screwdriver.
Spa suction fitting maximum flow rate: 84 gpm (5040 gph)
•
Check suction strainer fitting and fasteners for damage or tampering before each use of
the spa.
•
For service and winterization instructions refer to “Maintenance” and “Storage” sections.
•
Read and follow all instructions, save these instructions for future reference.
