![background image](http://html.mh-extra.com/html/intex/purespa-sjb-hs-11/purespa-sjb-hs-11_manual_2081128025.webp)
2016-0685
2017-10-02
failure.
firmly into the cell receptacle.
-
Contact Intex Service Center.
Replace the cell if needed.
E92
-
High salt level.
-
Partially drain the pool and refill it
with fresh water. See “Salt Level
Information”.
E94
-
Water temperature too low.
-
If the ambient temperature is below
4°C (39°F), we recommend not to
use the spa.
-
Turn off and unplug the control unit.
Plug the GFCI/RCD and restart all
over again.
-
Turn off and unplug the control
unit, add some warm water to raise
the spa water temperature above
5°C (41°F), then press the button to
heat up the water to the desired
temperature.
-
If problem persists, contact Intex
Service Center.
E95
- Water
temperature
too
high.
-
Turn off and unplug the control
unit. Where the water has cooled
down, plug the GFCI/RCD and
restart all over again.
-
Turn the heater off, then press the
filter and jet buttons to lower the
water temperature.
-
If problem persists, contact Intex
Service Center.
E96
-
System Error.
-
Turn off and unplug the control
unit, use the cap to stop the water
from flowing out of the tub,
diassemble and drain out the
control unit. Reassemble the
control unit back to the tub. Plug
the GFCI/RCD and restart all over
again.
-
If problem persists, contact Intex
Service Center.
E99
-
Water temperature sensor
broken.
-
Contact Intex Service Center.
END
-
After 72 hours of
continuous heating
operation, the pump will
hibernate automatically.
The rapid heating and
water filtration functions
are disabled.
-
Press the button to re-activate the
filter pump.
WARRANTY
Your PureSpa has been manufactured using the highest quality materials and workmanship.
All Intext products have been inspected and found free of defects prior to leaving the factory.
The Limited Warranty applies only to the PureSpa listed below.
The provisions of this Limited Warranty apply only to the original purchaser and is not
transferable. This Limited Warranty is valid for the period noted below from the date of the
initial retail purchase. Keep your original sales receipt with this manual, as proof of purchase
will be required and must accompany warranty claims or the Limited Warranty is invalid.
PureSpa Warrantly – 1 Year