General Advice:
Intex ProtecX
®
Half Face Respirator
(SR162)
is a reusable twin filtering device, designed to reduce exposure to certain
airborne contaminants that maybe gaseous or particulates, providing a maximum filter penetration of 6% for solid,
liquid aerosols and dust. This device is to be used by trained personnel or used under the supervision of trained
personnel. Misuse may result in serious bodily harm or death. It has been manufactured to comply with (1) the European
harmonized standard EN140:1998 and was certified to meet the essential requirements of the Regulation (EU) 2016/425.
Certified by BSI Group The Netherlands B.V., Say Building, John M. Keynesplein 9, 1066 EP Amsterdam, Netherlands
(Notified Body No: 2797) (2) AS/NZS 1716:2012 standard and was certified by BSI Benchmark, Australia.
Keep this instruction sheet for future reference.
Parts & Components:
Installation Instructions:
Installing Filters
1.
Align the filter cavity against the mask protrusion.
2.
Attach the filter onto the Half Face and turn following the arrow direction to lock into place.
Fitting Headpiece:
1.
Adjust head cradle size as needed to fit comfortably on head.
2.
While holding the bottom straps with one hand, position the Face over the nose and mouth.
3.
Hook the bottom straps together behind the neck and secure the clip.
4.
Adjust strap tension by pulling strap ends to achieve secure and comfortable fit.
5.
If necessary adjust the strap tension by pushing out on back side of buckles.
1.
Head Strap & Cradle
2.
Inhalation Valve Diaphragm
3.
Exhalation Valve Diaphragm
4.
Filter & Valve Attachment Base
5.
Half Face Seal
6.
Filter Replacements
(SRFP2)
7.
Filter & Cartridge Replacements
(SRCP2)
Intex ProtecX
®
Half Face Respirator
Item No: SR162
Personal Protection Equipment meets AS/NZS 1716:2012
Read and understand these instructions
before respirator use. Failure to do so could
result in serious bodily harm.
IMPORTANT
4
4
Fully assembled respirator
