![background image](http://html.mh-extra.com/html/intex/krystal-clear-603/krystal-clear-603_owners-manual_2081435006.webp)
English
57CD
SAVE THESE INSTRUCTIONS
English
(57CD) MODEL 603 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/15/2016
Page 6
SETUP INSTRUCTIONS (continued)
WARNING
Risk of electric shock. Position this product away from the pool, so as to prevent
children from climbing on it and accessing the pool.
CLEANING OR REPLACING FILTER CARTRIDGES
1.
Make sure filter pump is not operating. Disconnect line cord.
2.
To prevent water from escaping the pool, unscrew the pool inlet nozzle
(10)
and strainer
grid
(11)
from the strainer connectors and insert the hat-like plugs into the strainer
connectors.
3.
In a counter-clockwise motion, remove the filter housing collar
(12)
and threaded cover
(3)
.
Be careful not to lose the cover seal
(4)
.
4.
Remove filter cartridge
(5)
to clean it. The filter may be cleaned from the spray from a water
hose.
5.
Use judgement as to whether cartridge needs to be replaced.
6.
Return cartridge to filtering position.
7.
Return the seal
(4)
and threaded cover
(3)
to their original positions and in a clockwise
direction rescrew the housing collar
(12)
onto the filter housing.
8.
After service, open the air release valve, remove the plugs, allow any air to escape through
the valve before tightening the valve again and replace the pool inlet nozzle
(10)
and strainer
grid
(11)
. The pump is now primed with water again and may be turned on.