background image

139

PO

(139PO)  AP640R  6-C BUILT-IN ELECTRIC PUMP  ENGLISH  4.875” X 7.25”  04/18/2014

139

PO

(139PO)  AP640R  6-C BUILT-IN ELECTRIC PUMP  ENGLISH  4.875” X 7.25”  04/18/2014

SAVE THESE INSTRUCTIONS

Page 1

SAVE THESE INSTRUCTIONS

Page 2

PARTS REFERENCE

Part Descriptions:

1. BUTTON 
2. HANDLE
3. BATTERY 

HOLDER

4. BATTERY 

COVER

5. SWITCH

6.  INFLATION MARK (        )
7.  DEFLATION MARK (        )
8.   AIR PASSAGE AND CONTROL DIAL VALVE 
9.   CONTROL DIAL
10. AIRBED   

INTEX

®

 OWNER'S MANUAL

Built-in Fast-Fill™ Electric Pump

Model AP640R

6-"C" cell size batteries 

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT

INSTRUCTIONS

General
• 

For maximum power use alkaline batteries. Remove batteries from equipment which is   

 

not to be used for an extended period of time.

• 

Do not mix old and new batteries. Do not mix alkaline, standard (Carbon - Zinc), or  

 

 

rechargeable (Nickel - Cadmium) batteries.

• 

Remove used batteries promptly.

• 

Do not dispose of batteries in a fire. Check your local regulations for proper disposal  

 

 instructions.

• 

Keep away from heat or direct sunlight.

• 

No specific air pump maintenance is required.

•  Always purchase the correct size and grade of battery most suitable for the intended use.
•  Replace all batteries of a set at the same time.
•  Clean the battery contacts and also those of the device prior to battery installation.
•  Ensure batteries are installed correctly with regard to polarity (+ and -).

• 

For cleaning use only mild soapy solution. Do not use any chemicals.

• 

In case of repairs, use only common PVC repair glue and patches. 

139-*PO-R0-1504

• 

Infants have suffocated on inflatable mattresses. Never place infant aged birth to 15 months to sleep on this 

 

inflatable air mattress / air bed. Infants can suffocate on an underinflated or deflated mattress, on bedding , 

 

by co-sleeping with another person, and by entrapment between the mattress and bed frame or between the 

 

mattress and a vertical surface.

• 

Children can be entrapped between the inflatable mattress and an adjacent vertical surface. Provide at least a 

 

shoulder width space between the inflatable mattress/airbed and adjacent vertical surfaces such as walls, 

 

dressers or other objects. 

• 

Always keep the inflatable mattress fully inflated when in use.

• 

Never introduce any flammable substance into the inflatable airbed, SUCH AS AEROSOL TIRE REPAIR 

 

PRODUCTS, as it may ignite or explode.

  This is not a toy. Children must not be left unattended when using the airbed.

• 

Keep the storage bag away from babies and children. The storage bag is not a toy. When not in use, fold the 

 

bag and put it away out of the reach of children.

  Do not walk, stand on or jump on or use the airbed as a trampoline.

• 

Do not use on or near water. This is not a raft.

• 

Do not set up bed near stairs, doors, drops, sharp edges or breakable objects. Provide adequate space  

 

 

between bed and objects to avoid entrapment.

• 

Make sure the area is flat, smooth, even and free of sharp objects that could puncture the bed.

• 

Keep pets away from the airbed. Pets may puncture the surface of the bed.

• 

Avoid sleeping on the edge of the airbed. Edges produce less support than the middle of the bed.

• 

Do not obstruct the air passage opening or insert any objects into the opening.

  Do not operate air pump for more than 10 minutes at a time. Let pump cool at least 5 minutes between use.

FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID SUFFOCATION, PROPERTY DAMAGE, 
ELECTRIC SHOCK, BURNS OR OTHER INJURY.

WARNING

INFLATION

1.  Pull out the battery holder by holding the handle. See Fig (1).
2.  Press the button on the batteries holder and open the battery cover. See Fig (2).
3.  Insert 6 - "C" alkaline batteries (

NOT INCLUDED

) as shown on the drawings inside the  

 

battery compartment. See Fig (3).

4.  Close the battery holder securely and slide back into the housing.
5.  Turn the control dial clockwise until arrow points to inflation mark (        ). See Fig (4).
6.  Press "I" to switch ON. See Fig (5).
7.  When the airbed is fully inflated to the desired firmness, press "O" to switch OFF. See 
 Fig 

(6).

NOTE:

 Drawings for illustration purpose only. May not reflect actual product. Not to scale.

Model

 

 AP640R

Fast-Fill

TM

Model

 

 AP640R

Fast-Fill TM

10

7

8

9

1

2

3

6

5

4

Model

 

 AP640R

Fast-Fill

TM

Model

 

 AP640R

Fast-Fill

TM

FIG (1)

Model

 

 AP640R

Fast-Fill

TM

FIG (2)

FIG (3)

FIG (6)

FIG (5)

FIG (4)

Fast-Fill

Model AP640R

TM

Reviews: