Intesis
Box
®
ASCII Server
– KNX
User Manual r1.0 EN
© Intesis Software S.L.U. - All rights reserved
IntesisBox
is a registered trademark of Intesis Software SLU
5/20
email:
web:
phone: +34 938047134
1
Description
1.1 Introduction
This document describes the integration of KNX installations into ASCII serial (EIA232 or EIA485) or ASCII IP compatible
devices and systems using the I
ntesisBox ASCII Server
– KNX
gateway.
The aim of this integration is to make accessible KNX system signals and resources from any system capable to be
programmed to read and write simple text messages through EIA232 or EIA485 serial port or Ethernet TCP/IP port (for
example Extron, LiteTouch systems).
The gateway acts as a KNX device in its KNX interface, reading/writing points of other KNX device(s), and offering this
point's values of KNX device(s) through its ASCII interface using simple ASCII messages.
Configuration is carried out using the configuration software IntesisBox
®
MAPS.
This document assumes that the user is familiar with ASCII and KNX technologies and their technical terms.
Figure 1.1
Integration of KNX into ASCII IP or ASCII Serial control and monitring systems
ASCII EIA232 / EIA485
