Intesis
Box
®
ASCII Server
– KNX
User Manual r1.0 EN
© Intesis Software S.L.U. - All rights reserved
IntesisBox
is a registered trademark of Intesis Software SLU
13/20
email:
web:
phone: +34 938047134
5
Set-up process and troubleshooting
5.1 Pre-requisites
It is necessary to have an ASCII IP client or ASCII Serial master operative and well connected to the corresponding
ASCII port of IntesisBox as well as the KNX devices connected to their corresponding ports as well.
Connectors, connection cables, PC to use the configuration tool and other auxiliary material, if needed, are not supplied
by Intesis Software SLU for this standard integration.
Items supplied by Intesis Software for this integration are:
•
IntesisBox gateway.
•
Mini-USB cable to connect to PC
•
Link to download the configuration tool.
•
Product documentation.
5.2 IntesisBox MAPS. Configuration & monitoring tool for IntesisBox ASCII series
5.2.1 Introduction
IntesisBox MAPS is a Windows
®
compatible software developed specifically to monitor and configure IntesisBox ASCII
series.
The installation procedure and main functions are explained in the
IntesisBox MAPS User Manual for ASCII
. This
document can be downloaded from the link indicated in the installation sheet supplied with the IntesisBox device or in
the product website at www.intesisbox.com
In this section, only the specific case of KNX to ASCII systems will be covered.
Please check the IntesisBox MAPS user manual for specific information about the different parameters and how to
configure them.
5.2.2 Connection
To configure the IntesisBox connection parameters press on the
Connection
button in the
menu bar
.
Figure 5.1
MAPS connection
