ION-E100-HD
–
User manual
Page 16 of 28
Once the IP information is set, the Silverlight web application served by the ION-E100-HD can
be launched from the ICT or directly in your web browser by typing the device’s IP address in the
address bar. You can start to use your networked video management system for final system
configuration or you can configure advanced parameters using the ION-E100-HD’s web based
management.
6.2 Using the ION-E100-HD Web Application
When entering the Web Application, you will be asked a username and password. The default
user name and password is ‘
admin
’. The following window wil
l be displayed:
The following parameters may need to be programmed before using the unit:
1.
An NTP time server address
2.
Video encoder streams
InterTest, Inc • 303 Route 94 • Columbia, NJ 07832 • 908-496-8008 • [email protected] • www.intertest.com