InterTest, Inc. • 908-496-8008
MZ-5™ FS Inspection System
EM15201 Rev A
Page
29
Version 1.0 • Nov 2020
Line
a) Place the 1
st
point. A Cross Hair
will appear
i) Hold down the Left mouse button & drag to the 2
nd
point. Let go when you arrive at the
second point.
ii) Once the line is placed. You can move the end points. Hover over the point. The cursor will
change to an Arrow.
iii) The position of the line can be altered. Hover over the line, cursor will change to a hand
with the index finger extended
. You can now reposition the line.
Figure 34 Line Measurement
Line # & Measured Value
