www.intertec.info
Operating Instructions CP MICROTHERM DBNA
Page 4 / 8
HOM146708235Ien-4
INTERTEC-Hess GmbH · Raffineriestr. 8 · 93333 Neustadt/Donau · Germany ·
+49 9445 9532-0 · [email protected]
NOTICE
NOTE
It is essential to pay attention to this safety advice as you
may otherwise incur material damage.
INFO
Important notes and useful additional information.
5
Safety information
CAUTION
Risk of injury at the rib ends
The sharp edges on the heating ribs may cause injury if
handled incorrectly.
CAUTION
Risk of burns from a hot surface
Attainable highest temperatures:
- Max. 160°C with T3 heating systems
- Max. 100°C with T4 heating systems
- Max. 70°C with T5 heating systems
- Max. 50°C with T6 heating systems
Do not touch device during operation! Before working on
the device, allow it to cool down first.
6
Installation accessories
The following are included in the scope of delivery:
Piece
Description
1
Heating unit
1
Angle bracket made of flat steel
1
Packet of screws containing the following:
2
Hexagon bolts M 6x12
1
T-head bolt type 28/15, M 6x15
2
M6 flat square nut
1
Washer shape A 6.4
2
Lock washers shape J 6.4
1
M6 hex nut
If one of the components listed here is not included in
the scope of delivery, then please contact the manufac-
turer.
7
Technical Data
Protection class
IP66/IP68 1bar/30min
Rated voltage
max. 250 V AC
Permitted operating voltage
max. 275 V AC
Rated current (in compli-
ance with VDE 0298)
max. 10 A
Ambient temperature
- 60 to + 60°C
Max. permitted operating
temperature
- 60 to + 180°C
Switching capacity of fault
alarm (AM)
10 A / 275 V AC
Connecting cable
Silicone hose cable,
notch- and oil resistant, 3
x 1,5 mm² Ø8,8 mm
Connecting cable AM
Silicone hose cable,
notch- and oil resistant, 5
x 1,0 mm² Ø8,5 mm
Material
Seawater-proof alu-
minium, black anodized
Mean Time Before Failure
50.000 h
Storage temperature
- 60 to + 80°C
Special voltages with corresponding power adjustment
and component selection are possible.
Profile type "N" Height x
Width x Depth
155 x 50 x 50
mm
INFO
You will find the precise technical data for your in-
strument on the label.