20 von 54
Version 2.0 (04/2019) Online
Translation of the original operating manual
Product information
3.6
Meaning of the LEDs
The LEDs indicate the operating condition of the ZoneControl and the RollerDrive and provide information about the
operating voltage.
LED green
LED red
Meaning
Behaviour of RollerDrive
Flashing
1)
Flashing
1)
Initialisation of ZoneControl
Depending on sensor assignment
On steady
Off
ZoneControl ready for operation Stop
Flashing
1)
Off
RollerDrive receives start signal
Rotates
On steady
Flashes once
1)
RollerDrive faulty or not
connected
Stop
On steady
Flashes twice
1)
Fault in conveyor process (for
instance jammed package)
Stop
On steady
Flashes three times
1)
Shutdown due to excessive
temperature in chopper
resistance
Stop
Off
Flashes four times
1)
System error (for instance PTP
cable disconnected)
Stop
Off
On steady
Fuse triggered
Stop
1)
Depending on the error, the LED flashes in different sequences (0.5 s on - 0.5 s off) within a period of 4 seconds.
