Interroll Roller Conveyor SH 1110
Installation
22
Version 1.0 (06/2022) en
Translation of original operating instructions
Installing the universal support
The universal supports are delivered pre-assembled, with Z or U mounting brackets depending
on the selection. The universal supports are turned towards the conveyor center for transport
and still must be positioned before startup depending on their use (for the installation of
adjustable side guide, photo cell or reflector).
1
5
4
2
6
3
7
1
Side frame
5
Clamping plate
2
Side guide bracket
6
Torx screw
3
Torx screw
7
Universal support
4
Mounting bracket (Z-bracket)
WARNING
Risk of injury from crushing and electrocution
Installation and maintenance tasks on a conveyor system while it is in operation can cause
crushing and electric shock.
4
Power down the entire conveyor module and ensure that it cannot be started accidentally.
Fasten screws with a tightening torque of 19 Nm.
