Version 2.0 (12/2019) Online
Translation of the original operating manual
35 von 38
Appendix
Controller Connection
Cable 100 mm long with 5-pole M12 connector, matching socket of the Interroll DriveControl 200/300.
Power supply (Pin 1, 3)
Rated voltage
24 V DC
Voltage range
19 bis 26 V DC
Remaining ripple
max. 200 mV
PP
Overvoltage resistance
max. 35 V DC
Without harmonic waves max.
500 ms
Rated current consumption, without
motor
0,5 A
at 24 V
Rated current consumption, with
motor
3 A
at 24 V
Max. current consumption, with
motor
5 A
at 24 V
max. 500 ms
Direction of rotation input (Pin 2)
Properties
not galvanically separated
Reverse polarity protection
yes
max. -30 V DC
Maximum voltage
30 V DC
Logic level low
max. 0,8 V DC
Anticlockwise direction of rotation
Logic level high
min. 2,4 V DC
Clockwise direction of rotation
Input resistance
5,6 kΩ
Error output (Pin 4)
Properties
not galvanically separated, open collector
Max. voltage
30 V DC
Series resistance
5,6 kΩ
external load resistance required in
accordance with VCC
Max. collector current
5 mA
Max. output voltage
8,9 V DC
@ I
C
= 1,5 mA
Logic
Transistor conducting = OK
Transistor not conducting = Error
