Interroll Drum motor series i, S, S/A, D
Version 4.1 (06/2015) en-US
Translation of original instruction manual
9
Safety
State of the art
The conveyor is designed according to the state of the art and is reliable in operation, once
distributed. However, risks may still arise.
Disregarding the notices in this manual may lead to serious injury.
4
Carefully read the manual and follow its content.
Intended use
The drum motor is intended for use in industrial environments, supermarkets and airports and is
used for transporting general cargo, such as parts, cardboard boxes or boxes, as well as
transporting bulk material such as granular material, powder and other fluid materials. The drum
motor must be integrated into a conveyor module or conveyor system. Any other use is
considered inappropriate.
Use of the drum motor is only allowed in the areas described in the product information chapter.
Any modifications that affect the safety of the product are not permitted.
The drum motor may only be operated within the defined operating limits.
Unintended use
The drum motor must not be used for transporting people.
The drum motor is not intended for use under impact or shock loads.
The drum motor is not designed to be used under water. Such a use leads to personal or fatal
injuries from electrocution as well as the penetration of water, resulting in a short circuit or motor
damage.
The drum motor may not be used as a drive for cranes or lifting devices or for the
corresponding hoist ropes, cables or chains.
Use of the drum motor for anything other than the intended purpose is subject to approval by
Interroll.
Unless otherwise stated in writing and/or specified in a quote, Interroll and its dealers shall
assume no liability for product damage or failure which result from failure to observe these
specification and restrictions (see the chapter "Electrical data" of the respective series).
