5640015_07.17_EN
PORTABLE IMILK401
-
Instruction Manual, Operation and
Maintenance original instructions
THIS MANUAL IS THE PROPERTY OF -
InterPuls
S.p.A.
-
ANY COPYING, EVEN PARTIAL, IS STRICTLY PROHIBITED
MI - 36
7.2.5
Automatic drip milking diagram (programs P3
– P5 – P7 – P9)
Once
VACUUM DELAY
has elapsed,
pulsation is activated and starts to
count the milking time
Once
INITIAL DELAY
has elapsed,
the main milking starts together with
monitoring of the milk
Milking proceeds as usual until the
quantity of monitored milk drops below
the threshold set in the
MIN FLOW
DRIPP.
Then
FINAL DELAY
counting
starts
If sufficient milk is detected again for
MIN FLOW DRIPP
before the
FINAL
DELAY
has elapsed, milking proceeds
as usual
If sufficient milk is
NOT
detected again
from the
MIN FLOW DRIPP
before the
FINAL DELAY
has elapsed, it moves
on to the DRIP phase
MILKING
MAIN
DRIP FLOW
LEVEL
1 2 3 …
Initial
Delay
1 2 3 …
Final
Delay
1 2 3 …
Final
Delay
1 2 3 …
Initial
Delay
Drip
Detachment
The DRIP phase starts. Once the
DRIPPING INT D
starts, the sensor
starts to monitor the milk passing
through
Drip operations proceed as usual until
the quantity of monitored milk drops
below the threshold set in the
MIN
FLOW DETACH.
Then
DRIPPING
FINAL
counting starts
If sufficient milk is
NOT
detected again
from the
MIN FLOW DETACH
before
the
DRIPPING FINAL
has elapsed,
detachment operations will start
If sufficient milk is detected again for
MIN FLOW DETACH
before the
DRIPPING FINAL
has elapsed, drip
operations proceed as usual
DRIP
1 2 3 …
Final
Delay
Drip
DETACHMENT
FLOW LEVEL