PORTABLE IMILK401
-
Instruction Manual, Operation and
Maintenance original instructions
5640015_07.17_EN
THIS MANUAL IS THE PROPERTY OF -
InterPuls
S.p.A.
-
ANY COPYING, EVEN PARTIAL, IS STRICTLY PROHIBITED
MI - 33
7.1 Detachment
During the detachment phase, the panel is on standby with the shut-off valve closed, pulsator off and milking
cluster retracted. During this phase, you can carry out the following operations:
-
Start milking
-
Start washing
-
Insert the number of the animal to be milked, in order to transfer data to the DHM software
-
Change the milking program
-
Change the panel parameters
Pressing the
key takes you to the following milking program (
Lock Programs
parameter needs to
be disabled).
7.2 Milking
Inserting the mobile part of COMBIFAST into the fixed seat, powers the iMilk401 panel. Depending on the
parameters set, the panel will start in the WASHING or DETACHMENT phase, or from the last active phase
prior to switching off (the latter setting is recommended for milk transport systems. To activate it, set the
Initial Phase
parameter to
Last phase
).
Should the panel be in the WASHING phase on start-up, press the
key to stop it and return to
detachment. From here, it is possible to start automatic milking by pressing the
key or inserting the
number of the animal to be milked (with DHM software).
7.2.1
Insert animal ID
From the detachment phase, insert the number of the animal to be milked. Press the
key to delete
the last digit inserted or
to confirm the number input. Press the
key to start milking.
Total amount of
milk from the
panel during
current milking
Milking
program
selected
Animal
number
inserted