InterPuls PORTABLE IMILK401 Instruction Manual, Operation And Maintenance Original Instructions Download Page 30 | Manualshive

Page: 30 / 62

InterPuls PORTABLE IMILK401 Instruction Manual, Operation And Maintenance Original Instructions Download Page 30

5640015_07.17_EN

PORTABLE IMILK401

-

Instruction Manual, Operation and

Maintenance original instructions

THIS MANUAL IS THE PROPERTY OF -

InterPuls

S.p.A.

-

ANY COPYING, EVEN PARTIAL, IS STRICTLY PROHIBITED

MI - 30

6.7 Handling of the Portable iMilk401

Transporting the Portable iMilk401 from one milking point to another may be carried out in two ways:



By hand by the operator



Using track transport systems

WARNING
The Portable iMilk401 is also provided with coupling to a track system. InterPuls does not
supply such a system, and it is the engineer's task to ensure that the track system is safe and
does not cause system malfunctions.

WARNING

During device transport between one milking and another:



Position the CombiFast in the special transport support (ref. 1)



Ensure that the milking cluster has the locking ball positioned in the special transport
bracket (ref. 2)



Ensure that the milk tube and vacuum tube do not hinder the operator from walking
when they are placed on the special supports (ref. 3)



Hold the device as shown in the figure (ref. 4)

Failure to follow these safety instructions could result in injury to people.

«
...
28
29
30
31
32
...
»

Summary of Contents for PORTABLE IMILK401































































Reviews:

No comments