manualshive.com logo in svg

InterPuls PORTABLE IMILK401, Instruction Manual, Operation And Maintenance Original Instructions, Page: 29 / 62

Share
Download
InterPuls PORTABLE IMILK401 Instruction Manual, Operation And Maintenance Original Instructions Download Page 29

 

 

PORTABLE  IMILK401 

- 

Instruction  Manual,  Operation  and 

Maintenance original instructions

 

 

5640015_07.17_EN 

 

 

 

 

 

THIS MANUAL IS THE PROPERTY OF  - 

InterPuls

 

S.p.A.

 

- 

ANY COPYING, EVEN PARTIAL, IS STRICTLY PROHIBITED 

MI - 29 

6.6  Positioning of the Portable iMilk401 during washing 

 

Should the DHM software be present, download via CANBUS network will start as soon as a Portable 
iMilk401 is connected to the fixed part of the Combifast assembled in the washing shed (the said station 
must be powered). Data download takes a few seconds for each panel. 
To download milking data correctly, do as follows: 

 

Keep the fixed part of the Combifast powered and connect the various Portable iMilk401, one at a 
time, waiting for the previous panel to terminate data download between one connection and 
another 

 

Keep all fixed parts of Combifast disconnected, connect all Portable iMilk401 and then supply power 
to all washing stations. 

  CAUTION 

Do not remove the Combifast and do not remove power supply during data download. 
Do not connect other Portable iMilk401 before the previous panel has terminated its data 
download. 

Washing pipe 

Vacuum pipe 

Support pipe 

Milk pipe 

Summary of Contents for PORTABLE IMILK401































































Reviews:

No comments