Interphase ENTIA 5536 DM PRI, User Manual

Page: 115 / 244

Chapter 6: Setting Up Calls
5536 PRI RAS Communications Controller Users Guide
95
Setting Up RAS Support Properties
Using the Interphase RAS support dialogs, you can set up
general RAS support properties for incoming ISDN and digital
modem RAS support calls. You can also configure incoming
call filters for ISDN calls.
Setting Up General RAS Support Properties
To set up general RAS support properties for ISDN or digital
modem RAS support calls:
1. From the Start menu, select Settings , and then Control
Panel . Then double-click the Network icon, and select
the Adapters tab.
2. In the Network Adapters dialog box, select the driver
for which you are configuring RAS support, as follows:
– If you are configuring the ISDN RAS Support
driver, select
Interphase 553x ISDN RAS Support .
– If you are configuring the Digital Modem RAS
Support driver, select
Interphase 5536 Digital
Modem RAS support .
3. Click the Properties button.
The RAS Support General dialog box appears. The title
bar identifies the driver being configured.