Interpack ipg RSA 2625-TB, Operations Manual & Parts List

Page: 28 / 48

RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Setup Procedures
4-8
WARNING: TURN OFF ELECTRICAL POWER SUPPLY AND DISCONNECT THE
POWER CORD FROM THE ELECTRICAL SUPPLY BEFORE BEGINNING
TO WORK ON THE TAPE HEADS OR TO LOAD TAPE. IF POWER CORDS
ARE NOT DISCONNECTED, SEVERE INJURY TO PERSONNEL COULD
RESULT. THE KNIFE CONTAINED IN THE TAPE HEAD IS EXTREMELY
SHARP. USE CAUTION WHEN REMOVING THE BLADE GUARD AND
THREADING THE TAPE TO AVOID PERSONNEL INJURY.
4.8 T
APE
T
HREADING
4.8.1 Upper Tape Head
1. Remove the blade guard from the knife in the Tape head.
2. Follow the Tape Threading Diagram on the side plate of the ETX Tape Head.
3. See your Tape Head manual for further information if required.
4.8.2 Lower Tape Head
1. Lift Top tape Head Box to the uppermost position by activating the “BLOCKED” selector switch on the
control box.
2. Remove the Lower tape Head by grasping the tape application rollers and lifting straight up.
3. Remove the blade guard from the knife in the Tape head.
4. Follow the Tape threading diagram on the side plate of the ETX Tape Head.
5. See your Tape Head manual for further information if required.
6. Replace the Lower tape head in the machine.
7. Turn off the “BLOCKED” selector switch.