Section 8, Operating the Oasis
®
Chinook Heating System
8-2
The Oasis
®
Chinook Heating System
·
Support for high flow domestic hot water demand. The
system increases ground water temperature by 60F at a flow
of 1.5 GPM (using only the diesel burner). The mixing valve
(factory pre-set), will limit the temperature to 120F.
·
Easy to install and field serviceable with the Oasis
®
Chinook
Heating System hookups and connections easily accessible
from the top of the heater.
·
Easy to fill and purge, zero pressure system.
·
Easy to drain.
·
A high-temperature, stainless steel burner and stainless steel
jacket.
·
7 US gallon welded, insulated stainless steel coolant tank that
minimizes heat loss and optimizes heat recovery.
·
Domestic water flow switch for quick response to domestic
hot water demand.
·
Low coolant level switch on the tank.
·
Quiet operation.
·
Low pressure fuel system with built-in fuel pump.
·
Fuel efficient burner capable of burning a wide variety of
diesel-based fuels (CSA/UL certified for diesel #1 and #2).
·
Exhaust has minimal smoke and smell.
·
Fan assisted, sealed combustion chamber is designed to use
outside combustion air.
·
Simple, low amperage draw ignition.
·
Electronically-controlled system with:
·
automatic Safety Shutdown;
·
manual-resettable
aquastats
for
safety
overheat
protection.
·
LED indicators on the Control Panel for diagnostics.
·
Patented, proprietary flame sensor.
·
Remote Operating Panel with ON/OFF switch for the diesel
burner, AC elements, and engine pre-heat, if installed.
