International Thermal Research
6-1
Wiring the Electrical System
6.1 Before You Begin
The Oasis
®
Chinook and its electrical Control Board (mounted
internally) are pre-wired and have been thoroughly tested together
as a unit. To integrate the Oasis
®
Chinook into your system, wiring
will be required between the following system components:
·
120VAC Power
·
12VDC battery
·
Oasis
®
Chinook Heater
·
Oasis Chinook Remote Operating Panel
·
Oasis Chinook Zone Control Board
·
Thermostats
·
Cabin Fans
To review the wiring for the Oasis
®
Chinook Heating System, refer
to the wiring diagram shown in Figure 6-1: System Wiring.
All electrical connections and wiring must comply with normally-
accepted 12 VDC and 120 VAC wiring practices, local regulations,
and RVIA standards. Only a qualified electrical installer should
complete the wiring. All field wiring is to be in accordance with CSA
Standard C22.1, Canadian Electrical Code Part l or the National
Electrical Code, ANSI/NFPA 70.
The main electronic Control Board is mounted onboard the Oasis
®
Chinook itself. It has no user adjustable components.
Section
6
!
WARNING
NOTICE
