Page 6
Stick the sealing strip
Cut the sealing strip into proper length. Tear off the
paster and stick the sealing strip at the lower part of the
window frame. Stick one sealing strip at the outdoor
lower sill
Install
Your Air Conditioner in the
Window
•
Handle air conditioner gently.
•
Be sure your air conditioner does not fall out
of the opening during installation or removal.
•
The place where the power cord exits the air
conditioner should be no more than 6 ft (182
cm) from a grounded 3 prong outlet.
•
Do not block the louvers on the front panel.
•
Do not block the louvers on the outside of
the air conditioner.
Install Your Unit
•
Center the air conditioner in window. Check
that lower rail of air conditioner is behind
and against back side of window sill.
Maintain a firm grip on the air conditioner
cabinet. Lower window sash to hold cabinet
in place.
NOTE:
Check that air conditioner is tilted back
about 3
º
to 4
º
downward to the outside. After
proper installation, condensate should not drain
from the overflow drain hole during normal use,
correct the slope otherwise.
•
Measure the distance between the right-
hand side of the cabinet and the inside of
the window channel.
•
Repeat for the left side. Adjust the cabinet
until the distance on each side is the same.
•
Extend the left and right accordion panels
out against the window frame.
•
Use the 5 Type B screws and the Frame
lock (for 10K&12K models only) to fix the
frame of accordion panels at the window
frame and window sill.
6K & 8K model:
10K & 12K model:
