Page 5
INSTALLATION INSTRUCTIONS
Prepare Your Unit
Install the Top Mounting Rail.
•
Locate provided bag of screws.
•
Remove the tape at back side of sponge,
and then align it at the bottom edge of upper
rail to attach the sponge to the upper rail.
•
Use 4 type A screws (See Page 2) to attach
the top mounting rail to the air conditioner.
Note: For some models, the top mounting
rail might be pre-installed to the unit, skip
this step if it is installed.
Install the Accordion Panels
•
Hold the accordion panel in one hand and
gently pull back to free the open end.
•
Stick one sealing strip respectively on the
left side and right side of accordion panel as
shown below.
•
Install the left and right accordion panels into
both sides of the air conditioner respectively.
•
Slide the panel all the way in and repeat on
the other side.
