Page 11
REMOTE
CONTROL
Handling and location of the remote controller
Use the remote controller at a distance of 26 ft., or less, from the appliance. Point it towards the receiver on the air
conditioner. Communication is confirmed with a beep.
CAUTIONS
•
The air conditioner will not operate if curtains, doors or other materials block the signal from the remote control to
the air conditioner.
•
Avoid
o
Liquids
o
Direct Sunlight
o
Extreme Temperatures
•
If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner may not function
properly.
•
If other electrical appliances react to the remote controller, either move these appliances or consult your local
dealer.
Replacing Batteries
The remote control is powered by two AAA alkaline batteries housed in the back of the remote. (Do not use
rechargeable batteries)
(1) Remove the cover by pressing down and sliding back.
(2) Remove the old batteries and insert the new batteries, observing polarity.
(3)
Replace the battery cover.
Remote Control Specifications
Rated Voltage
3.0V
Lowest Voltage of CPU
Emitting Signal
2.0V
Signal Receiving Range
26 ft
Environment
-41-140
︒
F
•
The illustrations in this manual are for explanation purposes only. The actual shape of remote controller may be
slightly different.
•
An audible sound will be heard when the buttons are pressed to change settings or modes.
•
When you don
’t use remote controller for a long time, please take the batteries out.
