950-0139
7/21/2009
- 3 -
Parts List:
33 ft. Single Zone Installation Kit.
Installation Considerations:
Units have a maximum line set horizontal length
and vertical lift. Do not exceed these maximum lengths.
Model
Design
Length
Max. Horizontal
Length
Max. Vertical
Lift
MS29A13115A, 9A23YGX
26.25 ft.
32 ft.
16 ft.
MSC49HP13115A, 9H43YGX
16.4 ft.
32.8 ft.
16.4 ft.
MS212A13115A, 12A23YGX
26.25 ft
32 ft.
16 ft.
MSC412HP13115A, 12H43YGX
16.4 ft
32.8 ft.
16.4 ft
MS212A13240A, 12A23ZCX
26.25 ft.
32 ft.
16 ft.
NOTES: Line lengths over design length may have reduced capacity. An oil trap
is recommended for lengths over 16 ft.
o
Locate area to install indoor unit.
o
Choose an area where the wall is plumb and determine how to best run
the unit interconnects.
o
Ensure that all panels/covers can be removed for service as required.
o
Indoor unit must be located a minimum of 4
’ from the floor and 6” from the
ceiling.
o
Ensure that no obstacles to airflow are directly in front of the unit for a
minimum of 16
’.
o
Do not install the indoor unit in areas exposed to high humidity (RH of
80% plus), direct sunlight and direct heat from stoves or other devices.
o
Locate the outdoor unit using the following clearances:
QTY PART NO. DESCRIPTION
CONTENTS
(1) 39 ft. 951-0405-1 Power Cable #12-3C Black, White, Green
(1) 39 ft. 951-0405-2 Power Cable #12-4C Black, White, Red, Green
(1) 33 ft. 951-0406-1 1/4" Copper Tubing, Insulated, W/Fittings
(1) 33 ft. 951-0406-2 1/2" Copper Tubing, Insulated, W/Fittings
(1) 33 ft. 951-0407-1 5/8" ID Condensate Drain Tubing
(1) 64 ft. 951-0408-1 2" Vinyl Tape
1 951-0129 Wall Sleeve Assembly
1 950-0139 Instructions
