- 8 -
EXTRA FEATURES
BUCKET FULL LIGHT
Glows when the bucket is ready to be emptied, or when the bucket is removed or not placed in
the proper position.
FILTER ALERT
A light will illuminate alerting you to clean filter.
AUTO SHUT OFF
The unit will automatically shut off in 30s when the bucket is full, removed, not placed in the
proper position, or the desired % humidity level is reached.
AUTO DEFROST
If frost builds up on the evaporator coils, the compressor will turn off and the fan will continue
running until the frost disappears.
3 MINUTE DELAY
After the unit has stopped, it cannot be restarted within 3 minutes. Operation will automatically
start after the first
3 minutes
.
CHECK FILTER FEATURE
The Filter Light will start flashing after 250 hours of operation. After cleaning the filter, press and
hold the Filter Button to reset the Filter Light.
AUTO RESTART
If the unit turns off unexpectedly (such as a power outage), it will resume operation with the
previous settings when the power resumes.
FAN SELECTION
Select two fan speeds
TANK, CONTINUOUS DRAIN, & PUMP DRAIN
P
Select between a drain hose or installed tank to remove moisture.
TIMER
Turns the unit on/off automatically
Setting the Timer
•
Press the Timer Button to initiate the Auto Start or Auto Stop function.
The Timer On Light will illuminate indicating the Auto Start function is initiated.
The Timer Off Light will illuminate indicating the Auto Stop function is initiated.
•
Press or hold the
Buttons to change the Auto Start/Stop time by 0.5
hour increments, up to 10 hours, and 1 hour increments, up to 24 hours.
•
After the desired time is set, the display will revert back to the previous
humidity setting.
•
Turning the unit ON or OFF or adjusting the timer setting to 0.0 will cancel
the Auto Start/Stop function.
•
When the code “P2” is displayed, the Auto Start/Stop function will be
cancelled.
P
For pump version only
