*
This will read
“Cont.” for non-pump version and “Pump” for the pump version
**
This will read “Normal” for non-pump version and “Cont.” for the pump version
- 6 -
CONTROL PANEL
NOTE: The control panel of the unit you purchased may be slightly different according to the
models.
CONTROL BUTTONS
All control buttons will make a beep sound to indicate a change in mode or setting.
1.
Cont./Pump Button
i.
Continuous Button
NP
Press to activate the continuous dehumidifying operation.
ii.
Pump Button
P
Press to activate pump operation.
NOTE: Make sure the pump drain hose is installed and the continuous drain hose is
removed before the pump operation is activated.
CAUTION: DO NOT PUMP TO ANY AREA WHERE THE TEMPERATURE IS LESS
THAN OR EQUAL TO 0
O
C (32
O
F).
2.
Filter Button
The Filter Light will illuminate after 250 hours of operation. Press and hold the Filter Button to
turn off the Filter Light after the air filter has been cleaned.
3.
Fan Button
Press to toggle between High or Normal fan speed. Set the fan control to High for maximum
moisture removal. The Turbo Light will be lit indicating the fan is operating on high speed.
4.
Power Button
Press to turn the unit on and off.
NP
For non-pump version only
P
For pump version only
