Chapter 4 — Configuring the SR61T
32
SR61T Tethered Scanner User’s Guide
Basic Setup with Configuration Bar Codes
This chapter provides you with configuration bar codes for a basic
setup. For more configuration options, use EasySet (see
“Configuring Your Scanner with EasySet” on page 33
Resetting Your Scanner
To reset your scanner, read the reset factory defaults configuration
bar code.
Reset factory defaults
Configuring Predefined Imager Modes
When using an SR61T2D, SR61THP or SR61TXR, you can configure
predefined imager modes according to the types of bar codes you
want to read. Use the following configuration bar codes to enable one
of the predefined imager modes.
1D bar codes only
Standard 1D and 2D bar codes
Configuring the Postamble
The default postamble is <CR> <LF>. For certain applications or
when using USB Keyboard HID you may need to change this setting.
Use the following configuration bar codes to change the default
postamble in your scanner.
Carriage Line Feed (*)
Summary of Contents for SR61T
