Chapter 3 — SG20T Interfaces
24
SG20T Tethered Scanner User’s Guide
The default serial parameters for the SG20T are:
Setting up the RS-232 Interface
This section provides configuration bar codes for a basic setup. All bar
codes marked with (*) indicate the default value. For more
configuration options see
Chapter 4, "Configuring the SG20T
Baud Rate
38400
57600 (*)
115200
128000
230400
256000
Serial Parameter
Default Setting
Baud rate
57600
Data bits
8
Parity
None
Stop bits
1
