manualshive.com logo in svg

Intermec PEN*KEY 6100, Programmer'S Reference Manual

The Intermec PEN*KEY 6100 offers an exceptional Programmer's Reference Manual, aiding users in maximizing the potential of their device. Unlock its full functionality with this comprehensive manual, available for free download on our website, ensuring a seamless user experience.

Share
Download
background image

INTERRUPT INDEX

PEN*KEY

R

 6100 Computer Programmer’s Reference Guide    Index-13

N

Network

Exchange Network Packets, INT 15h, 6Ć73

Receive a Network Packet, INT 15h, 6Ć74

Send a Network Packet, INT 15h, 6Ć75

Next

Read Next ASCII Character, INT 16h, 6Ć92

Read Next Extended ASCII Character, INT 16h, 6Ć94

Nonmaskable Interrupt 02h, 6Ć17
Norand

Norand Enhanced Video BIOS, Interrupt 10h, 6Ć56

Norand-Specific Display Modes, Interrupt 10h, 6Ć54

Normal, Request System Shutdown, Normal, INT 15h, 6Ć75
Number

Get Display Page Number, INT 33h, 6Ć106

Get Driver Version, Mouse Type, and IRQ Number, INT 33h,

6Ć107

Get Language Number, INT 33h, 6Ć107

Return Number of Keys on Default Keyboard, INT 16h, 6Ć96

Set Display Page Number, INT 33h, 6Ć105

O

Off/On

Backlight Off or On, INT 10h, 6Ć54

Conditional Off, INT 33h, 6Ć103

Light Pen Emulation Mode Off, INT 33h, 6Ć103

Light Pen Emulation Mode On, INT 33h, 6Ć103

Port Power Off or On, INT 14h, 6Ć67

Set Typematic Rates; Turn Off Key Repeat, INT 16h, 6Ć93

Set Typematic Rates; Turn On Key Repeat, INT 16h, 6Ć93

Turn Keyclick Off or On, INT 16h, 6Ć93

Open, Device Open, INT 15h, 6Ć83
Operation, Read Status of Last Operation, INT 13h, 6Ć60
Optional

Pend on Mailbox with Optional Timeout, INT 15h, 6Ć70

Pend on Queue with Optional Timeout, INT 15h, 6Ć70

P

Packets

Exchange Network Packets, INT 15h, 6Ć73

Receive a Network Packet, INT 15h, 6Ć74

Send a Network Packet, INT 15h, 6Ć75

Page

Get Color Page State, INT 10h, 6Ć46

Get Display Page Number, INT 33h, 6Ć106

Scroll Active Page Down, INT 10h, 6Ć39

Scroll Active Page Up, INT 10h, 6Ć39

Set Active Display Page, INT 10h, 6Ć38

Set Color Page State, INT 10h, 6Ć45

Set Display Page Number, INT 33h, 6Ć105

Palette

Enable/Disable Default Palette Loading, INT 10h, 6Ć52

Get Palette and Border, INT 10h, 6Ć44

Get Palette Register, INT 10h, 6Ć43

Set Color Palette, INT 10h, 6Ć41

Set Palette and Border, INT 10h, 6Ć43

Set Palette Register, INT 10h, 6Ć42

Parameters

Read Drive Parameters, INT 13h, 6Ć61

Return Pointer to Current Display Parameters, INT 10h, 6Ć53

Return System Configuration Parameters Address, INT 15h,

6Ć87

PCĆLike, PC-Like Miscellaneous System Services, Interrupt 15h,

6Ć22

PEL

Get PEL Mask, INT 10h, 6Ć46

Set PEL Mask, INT 10h, 6Ć45

Pen

Light Pen Emulation Mode Off, INT 33h, 6Ć103

Light Pen Emulation Mode On, INT 33h, 6Ć103

Pend

Accept Message from Mailbox (No Pend), INT 15h, 6Ć70

Accept Message from Queue (No Pend), INT 15h, 6Ć71

Pend On Keyboard, INT 15h, 6Ć86

Pend on Mailbox with Optional Timeout, INT 15h, 6Ć70

Pend on Queue with Optional Timeout, INT 15h, 6Ć70

Physical, 6Ć53

Physical Write Image, INT 10h, 6Ć58

Set Physical Display Size, INT 10h, 6Ć53

Pixel, Set Mickey to Pixel Ratio, INT 33h, 6Ć103
PM, Get PM Event, INT 15h, 6Ć81
Pointer

Return Pointer to BIOS Version, INT 15h, 6Ć74

Return Pointer to Current Display Parameters, INT 10h, 6Ć53

Set INT 1Fh Font Pointer, INT 10h, 6Ć48

Port

4000 Series Port Control BIOS Services, Interrupt 14h, 6Ć18

Extended Port Control, INT 14h, 6Ć67

Get Port Status, INT 14h, 6Ć65

Initialize Communications Port, INT 14h, 6Ć64

Port Power Off or On, INT 14h, 6Ć67

Read V25 Comparator Port, INT 10h, 6Ć37

Position

Get Button Status and Mouse Position, INT 33h, 6Ć100

Read Attribute and Character at Cursor Position, INT 10h,

6Ć39

Read Cursor Position and Mode, INT 10h, 6Ć38

Set Cursor Position, INT 10h, 6Ć38

Set Cursor Position, INT 33h, 6Ć101

Set Minimum and Maximum x Cursor Position, INT 33h, 6Ć101

Set Minimum and Maximum y Cursor Position, INT 33h, 6Ć102

Write Attribute and Character at Cursor Position, Interrupt

10h, 6Ć40

Write Character Only at Cursor Position, INT 10h, 6Ć40

Post

Post Message to Mailbox, INT 15h, 6Ć70

Post Message to Queue, INT 15h, 6Ć71

Power

Enable/Disable Device Power Management, INT 15h, 6Ć82

Enable/Disable Power Management, INT 15h, 6Ć80

Get Power State, INT 15h, 6Ć81

Get Power Status, INT 15h, 6Ć80

Port Power Off or On, INT 14h, 6Ć67

Set Power State, INT 15h, 6Ć79

Press, Get Button Press Information, INT 33h, 6Ć101
Print Screen Interrupt 05h, 6Ć17
Printer, 4000 Series Printer BIOS Functions, Interrupt 17h, 6Ć19
Processor, Adjust CX for Processor Speed, INT 15h, 6Ć73
Program, Program Termination, INT 15h, 6Ć83
Programmable, Programmable Font Support, Interrupt 10h, 6Ć56
Protected, Switch to Protected Mode, INT 15h, 6Ć85
Put, Put Key into Buffer as if from Keyboard, INT 16h, 6Ć93

Q

Queue

Accept Message from Queue (No Pend), INT 15h, 6Ć71

Initialize a Queue Structure as Empty, INT 15h, 6Ć71

Pend on Queue with Optional Timeout, INT 15h, 6Ć70

Post Message to Queue, INT 15h, 6Ć71

Summary of Contents for PEN*KEY 6100









































































































































































































































































































































Reviews:

No comments

Related manuals for PEN*KEY 6100

DAVIS and Vantage Pro User Manual & Setup Manual preview
and Vantage Pro
Brand: DAVIS Pages: 60
DAVIS Vantage Pro2 Updater Quick Start Manual preview
Vantage Pro2 Updater
Brand: DAVIS Pages: 4
DAVIS Weather Monitor II Owner'S Manual preview
Weather Monitor II
Brand: DAVIS Pages: 48
RaidSonic Icy Box IB-DK2301-C Manual preview
Icy Box IB-DK2301-C
Brand: RaidSonic Pages: 12
BALDR B0340WST2H2R-V8 User Manual preview
B0340WST2H2R-V8
Brand: BALDR Pages: 16
La Crosse Technology WS-7395U Instruction Manual preview
WS-7395U
Brand: La Crosse Technology Pages: 22
Campbell MetData 1 Instruction Manual preview
MetData 1
Brand: Campbell Pages: 54
Auriol 91679 Operation And Safety Notes preview
91679
Brand: Auriol Pages: 99
Hyundai WSC 1918 Girl Instruction Manual preview
WSC 1918 Girl
Brand: Hyundai Pages: 48
ALDI Sempre GT-WS-10s Operating Instructions Manual preview
Sempre GT-WS-10s
Brand: ALDI Pages: 64
Channel Vision P-3036 Manual preview
P-3036
Brand: Channel Vision Pages: 9
UPM WS290C Owner'S Manual preview
WS290C
Brand: UPM Pages: 6
UNITEC Climate 7610663203699 Owner'S Manual preview
7610663203699
Brand: UNITEC Climate Pages: 11
UNITEC Climate 7610663243008 Owner'S Manual preview
7610663243008
Brand: UNITEC Climate Pages: 15
Axon TASER Axon Dock Installation Manual preview
TASER Axon Dock
Brand: Axon Pages: 44
Icy Box Thunderbolt IB-DK406-TB3 Manual preview
Thunderbolt IB-DK406-TB3
Brand: Icy Box Pages: 12
La Crosse Technology 308-145 Quick Start Manual preview
308-145
Brand: La Crosse Technology Pages: 6
La Crosse M76171 User Manual preview
M76171
Brand: La Crosse Pages: 8

Brands by name

Popular brands

Load more brands