SECTION 6
Conversions and Interfaces
6-4 PEN*KEY
R
6100 Computer Programmer’s Reference Guide
File (Continued)
Comments
SCAN4000.EXE
SETDISP.EXE
Use VROTATE.EXE and FONTSEL.EXE (see
New 6000 Series
Files
, on page 6Ć4)
SOFTBIOS.EXT
BIOS is loaded from flash.
TNETBIOS.EXE
XLMEMIO.BIN
XLMEMIO is not supported.
Files that Have Changed
The following 4000 Series Files are used differently on the 6100 Computer. You
can make the changes as specified.
CONFIG.SYS
The extended CONFIG.SYS commands in the 4000 Series version of IO.SYS are
no longer supported:
Command Comments
EXT=
BIOS is loaded from flash. Remove these lines from CONFIG.SYS.
TSR=
Use INSTALL= or execute TSRs from ROMINIT.BAT or AUTOEXEC.BAT.
VERIFY
The VERIFY ON command, a feature of COMMAND.COM, can be used. However, this
command is not identical with VERIFY. VERIFY causes MINIĆDOS/MAXIĆDOS to write
through the disk buffers and to write directory information to the media whenever it
changes. These actions do not occur in DOS. The application is responsible for performing
file commits. Refer to the
PL/N Application Changes
topic, on page 6Ć7.
Refer to the sample CONFIG.SYS listing in
Appendix A, Sample Configuration
Files
, for an example of the CONFIG.SYS, as used in an application for the 6100
Computer. Also, refer to the
ROM DOS 5
paragraph, in the
Reference, System
Information
section, for additional information.
CPLNI.COM
Do not use the
-d
command line switch. Do not delete driver files from the RAM
drive after they are loaded. All files needed to restart the application after a reĆ
set must remain on the RAM drive.
PC4800.SYS
Use Version 1.80 or later for a PEN*KEY 6000 Series platform. This driver is
used for NORAND Portable Communications Protocol (NPCP) printer support
for both PL/N and nonĆPL/N applications. 4000API.EXE must be loaded when
PC4800.SYS is used.
PC-DEXIO.BIN
Use Version 1.26 or later for a PEN*KEY 6000 Series configuration.
4000API.EXE must be loaded when PCĆDEXIO.BIN is used.
New 6000 Series Files
The following files are new 6000 Series files that were not used on the 4000 SeĆ
ries platform:
AUTOEXEC.BAT
This is a standard ROM DOS 5 configuration file. Refer to the
ROM DOS 5
topĆ
ic, in the
Reference, System Information
section, for a description of this file.
6. Conversions and
Interfaces
Summary of Contents for PEN*KEY 6100
Page 1: ...PEN KEYR 6100 Computer PROGRAMMER S REFERENCE GUIDE P N 977 054 001 Revision B December 2000 ...
Page 14: ...CONTENTS xii PEN KEYR 6100 Computer Programmer s Reference Guide ...
Page 22: ...Preface 8 PEN KEYR 6100 Computer Programmer s Reference Guide PREFACE ...
Page 318: ...GENERAL INDEX Index 6 PEN KEYR 6100 Computer Programmer s Reference Guide ...
